BeamClamp Packing Pieces for BY Clamps

Overview

The range of packing pieces below are designed to provide support to the underside of type BY clamps to ensure they clamp at 90 degrees to the steel and provide a flat surface for the bolt head or nut to be tightened down on to. These can be used in various combinations with the two tail lengths of BY clamps to achieve the best clamping position.

The Type BY can be used in a variety of applications and our design team will be pleased to configure a connection specific to your requirements. A cut sheet is available for manually working out of the tail length and packing piece combinations along with the bolt lengths and location plate dimensions and is available upon request.


Technical Specifications

Diagram - Packing Pieces - BY
Diagram - Packing Pieces - BY
Type BF3
Product
code
A in. B in. C in. D in.
BF3G12 3/16 1-9/16 1-9/16 9/16
BF3G16 3/16 2 2-1/16 11/16
BF3G20 3/16 2-3/16 2-3/16 13/16

Type BF4
Product
code
A in. B in. C in. D in.
BF4G12 3/8 1-9/16 1-9/16 9/16
BF4G16 3/8 2 2-1/16 11/16
BF4G20 3/8 2-3/16 2-3/16 13/16

Type BH2
Product
code
A in. B in. C in. D in.
BH2G12 1/16 1-9/16 1-9/16 9/16
BH2G16 1/16 1-7/8 1-7/8 11/16
BH2G20 1/16 2 2 13/16