BeamClamp Rigging Clamps - KRC062

Overview

The Adjustable Rigging Clamp is a self adjusting, ready to install rigging clamp capable of safe working loads of up to 5,000 lbs. The shackle connection allows loads to be applied up to 45°. The Adjustable Rigging Clamp can accommodate a variety of flange widths and thickness and is installed without the need for any drilling or welding to the support beam.

The Adjustable Rigging Clamp is available in five (5) standard sizes to accommodate any flange width from 4” to 24”. The Adjustable Rigging Clamp is designed to be self adjusting to the flange thickness from as little as 1/8” to as thick as 2-1/2”.

The Adjustable Rigging Clamp is designed to accommodate the safe working load not to exceed 5,000 lbs.

Note: Custom designed rigging and lifting points are available. Please contact LNA Solutions for more information.


Technical Specifications

Diagram - KRC Rigging Clamps
Diagram - KRC Rigging Clamps
Product Code Flange Width (in.) Bolt Torque
(ft/lbs)		 Number of Bolts Safe Working Load
(lbs. Do Not Exceed)
KRC062-A 4” to 8” 109 4 5,000 lbs.
KRC062-B 8” to 12” 109 4 5,000 lbs.
KRC062-C 12” to 16” 109 4 5,000 lbs.
KRC062-D 16” to 20” 109 4 5,000 lbs.
KRC062-E 20” to 24” 109 4 5,000 lbs.

Note: The structural integrity of the existing steelwork should be verified by a licensed structural Engineer