The Widest Range of Steel Connection Solutions in Texas
LNA Solutions supplies the widest range of engineered steel-to-steel connection products available to Texas contractors, fabricators, and structural engineers: clamped, blind-bolted, and mechanically fixed connections that install without drilling or welding. Everything ships direct from our U.S. operation, backed by free engineering support and PE-stamped connection designs turned around in 24 hours.
If you are joining steel to steel on a Texas job, retrofitting an existing structure, hanging services, framing secondary steel, fixing grating, or connecting hollow sections from one side, there is an LNA connection method engineered and approved for it.
Connections clamp or blind-bolt to steel. No hot work, no burn permits, no coating repair.
Talk to a real LNA engineer directly. No login, no distributor queue.
Order direct from Buffalo, NY. No Texas distributor markup or delay.
Lloyd’s Register, DIBt, and ICC-ES seismic approvals across the range.
Built for the Texas Construction Boom
Texas leads the nation in commercial construction spending, more than double any other state, and the state is in the middle of a historic wave of data center, semiconductor, energy, and industrial building. Every one of those projects carries thousands of secondary steel connections: cable tray and equipment supports, facade steel, platforms, walkways, and grating. Those are exactly the connections LNA is engineered to make faster, cleaner, and code-compliant.
Explore the Texas product range:
- BeamClamp structural clamps: steel to steel with no drilling or welding, Lloyd’s and DIBt approved.
- BoxBolt blind bolts: connect hollow sections from one side only, ICC seismic-approved Type C.
- Steel floor and grating fasteners: FloorFix, FloorFix HT, GrateFix, and G-Clip, installed with hand tools.
- FastFit pre-engineered clamp assemblies, supplied with load data and drawings.
- Wedge Washer vibration-resistant bolt locking, TUV approved and DIN 25201 Junker tested.
Code Compliance and Free Engineering for Texas Projects
Texas has no statewide commercial building code. The International Building Code applies where local jurisdictions adopt it, and most major Texas markets, including Austin, San Antonio, and the Dallas-Fort Worth region, are on the 2024 IBC with local amendments. For coastal projects, Texas Windstorm Insurance Association rules follow the 2024 IBC for construction beginning March 1, 2026. Steel connection design references AISC 360 and ASCE 7 through the adopted code.
Every LNA product is backed by direct access to our engineers and a 24-hour PE-stamped design service, at no cost, with no distributor in the middle. Send us your connection, your loads, and your Texas jurisdiction, and we will return an approved, buildable detail.
Approved products, Lloyd’s Register and DIBt for BeamClamp, ICC-ES seismic Type C for BoxBolt across Seismic Design Categories A to F, documented against your project loads.
Free connection designs with a licensed PE stamp in 24 hours. No account and no distributor queue.
Used in infrastructure, energy, data center, industrial, and commercial steel construction.
Steel Connections Across Texas Industries
Frequently Asked Questions
Does LNA Solutions supply steel connection products in Texas?
Yes. LNA Solutions ships its full range of steel-to-steel connection products, including BeamClamp structural clamps, BoxBolt blind bolts, and steel floor and grating fasteners, direct to contractors, fabricators, and engineers across Texas, with no local distributor required.
Do LNA connections require drilling or welding?
No. LNA’s core connection methods clamp or blind-bolt to existing steel, so there is no drilling into the parent member and no hot work. That removes burn permits, fire watch, and coating repair on Texas job sites.
Are LNA products approved for Texas building codes?
LNA products carry independent third-party approvals, including Lloyd’s Register and DIBt for BeamClamp and ICC-ES seismic approval for BoxBolt Type C across Seismic Design Categories A to F. These support compliance under the IBC editions adopted across Texas jurisdictions.
How fast can I get an engineered connection design for a Texas project?
LNA offers free engineering support with a PE-stamped connection design available within 24 hours, direct from a qualified engineer, with no account or distributor queue.
Do I need to order through a Texas distributor?
No. LNA Solutions sells direct from its U.S. operation in Buffalo, NY. Texas customers order without distributor markup and get direct engineering support and inventory.