Home Products Beamclamp® Packing Pieces for Type BY

Beamclamp® Packing Pieces for Type BY

The range of packing pieces below are designed to provide support to the underside of type BY clamps to ensure they clamp at 90 degrees to the steel and provide a flat surface for the bolt head or nut to be tightened down on to. These can be used in various combinations with the two tail lengths of BY clamps to achieve the best clamping position.

Measurements & Specifications

BeamClamp Location Plates & Bolt Lengths – BF3
Tables scroll sideways on mobile

Product CodeA
in.		B
in.		C
in.		D
in.
BF3G123/161-9/161-9/169/16
BF3G163/1622-1/1611/16
BF3G203/162-3/162-3/1613/16

BeamClamp Location Plates & Bolt Lengths – BF4
Tables scroll sideways on mobile

Product CodeA
in.		B
in.		C
in.		D
in.
BF4G123/81-9/161-9/169/16
BF4G163/822-1/1611/16
BF4G203/82-3/162-3/1613/16

BeamClamp Location Plates & Bolt Lengths – BH2
Tables scroll sideways on mobile

Product CodeA
in.		B
in.		C
in.		D
in.
BH2G121/161-9/161-9/169/16
BH2G161/161-7/81-7/811/16
BH2G201/162213/16

How It Works

beamclamp bf1 packing pieces dimensions

How It Works

The Type BY can be used in a variety of applications and our design team will be pleased to configure a connection specific to your requirements. A cut sheet is available for manually working out of the tail length and packing piece combinations along with the bolt
lengths and location plate dimensions and is available upon request.

Get in Touch
structural beam clamp connections during construction