Beamclamp® Packing Pieces for Type BY #BF4G12

The range of packing pieces below are designed to provide support to the underside of type BY clamps to ensure they clamp at 90 degrees to the steel and provide a flat surface for the bolt head or nut to be tightened down on to. These can be used in various combinations with the two tail lengths of BY clamps to achieve the best clamping position.

Request Quote See specification charts

How It Works

How It Works

The Type BY can be used in a variety of applications and our design team will be pleased to configure a connection specific to your requirements. A cut sheet is available for manually working out of the tail length and packing piece combinations along with the bolt
lengths and location plate dimensions and is available upon request.

Measurements & Specifications

1/3

BeamClamp Location Plates & Bolt Lengths – BH2

Product CodeA
in.
B
in.
C
in.
D
in.
BH2G121/161-9/161-9/169/16
BH2G161/161-7/81-7/811/16
BH2G201/162213/16
Dimension table for location plates to suit type BY
Bolt
dia.
Bolt
grade
A (mm)
Upper beam
width +
B (mm)
Lower beam
width +
C (mm)
Upper beam
Min. width +
D (mm)
Lower beam
Min. width +
H (mm)
Dia.
T (mm)
Min.
M128.814.28714.28795.2595.2514.28712.7
M1210.914.28714.28795.2595.2514.28712.7
M168.817.46217.462117.475117.47517.46215.875
M1610.917.46217.462117.475117.47517.46215.875
M208.820.63720.63712712720.63719.05
M2010.920.63720.63712712720.63725.4
2/3

BeamClamp Location Plates & Bolt Lengths – BF3

Product CodeA
in.
B
in.
C
in.
D
in.
BF3G123/161-9/161-9/169/16
BF3G163/1622-1/1611/16
BF3G203/162-3/162-3/1613/16
3/3

BeamClamp Location Plates & Bolt Lengths – BF4

Product CodeA
in.
B
in.
C
in.
D
in.
BF4G123/81-9/161-9/169/16
BF4G163/822-1/1611/16
BF4G203/82-3/162-3/1613/16

Take a peek at our catalog

Address