How It Works
How It Works
FloorFix HT™ suits a wider range of applications and is designed to clamp flooring plate to supporting steel from the top without the need for on-site drilling, tapping, bolting or welding. FloorFix HT™ works with a cam mechanism that can be operated using a basic hexagon key drive, capable of connecting steel flanges from 1/8" - 1" without the need of additional packing pieces. FloorFix HT™ allows steel erectors a higher degree of tolerance, and for floor plates to be connected to new steel erected within +/- 1/4" of its intended position. FloorFix HT™ has all the benefits of our widely renowned original FloorFix™ grating clip design, and is more user friendly.
Features & Benefits
- Allows for +/- 1/4” construction tolerance
- Can clamp up to 1” thick steel as standard
- Hot Dip Galvanized finish as standard
- No drilling, tapping or welding required
- Allows easy repositioning or lifting of floor plate
- No special tools or skilled labor required
- No access to the underside required
- Tested for vibration conditions at TÜV
Measurements & Specifications
FloorFix HT
Catalog page 37.| Product Code | Screw Diameter | Floor Plate Thickness | Steel Flange Thickness | Tightening Torque (ft lb) | ||
| min | max | min | max | |||
| FLOORFIXM08HT | 5/16 | 1/8 | 1/2 | 1/8 | 1 | 15 |
| FLOORFIXM10HT | 3/8 | 3/16 | 1/2 | 1/8 | 1 | 18 |
| FLOORFIXM12HT | 1/2 | 1/4 | 1/2 | 1/8 | 1 | 22 |
FloorFix HT Grating Clip METRIC
| Product Code | Screw Diameter | Floor Plate Thickness | Steel Flange Thickness | Tightening Torque (Nm) |
||
| Min | Max | Min | Max | |||
| FLOORFIXMO8 | M08 | 3.175 | 12.7 | 3.175 | 15.875 | 20 |
| FLOORFIXM10 | M10 | 4.762 | 12.7 | 3.175 | 15.875 | 25 |
| FLOORFIXM12 | M12 | 6.35 | 12.7 | 3.175 | 15.875 | 30 |
Installation Instructions
Step 1
Assemble Floorfix HT to the underside of the floor plate making sure the markings “THIS WAY UP” are facing the underside.
Step 2
Tighten the bolt loosely making sure the flat edge of the clamp is in line with the edge of the steel it is going to connect to.
Step 3
Lower the plate in position over the supporting steelwork.
Step 4
Once the floor plate is in position, rotate the countersunk bolt one full turn counter-clockwise.
Step 5
Tighten the countersunk screw until the plate is secured. For guaranteed performance, use the recommended tightening torques given in Measurements & Specifications.
