Types of Floor Grating Clips, And When to Use Each One
Table of Contents
- Why Grating Clips Are Still the Standard
- FloorFix vs. FloorFix HT
- GrateFix, Built for Heavy Loads
- G-Clip GG, Quick and Reliable
- G-Clip GM, For Device Mounting
- The Classic Grating Clip
- Do Floor Grating Clips Really Matter That Much
- What to Ask Before You Order
- Installation Tips from the Field
- Still Not Sure, We’ll Help You Spec It
- Frequently Asked Questions
Why Grating Clips Are Still the Standard
Let’s be real, no one brags about their floor grating hardware. But if the wrong clip fails, everyone hears about it.
That’s why it’s worth knowing the difference between all the types of grating clips out there. Some are designed for speed. Others are built for high-vibe environments or heavier loads. And a few are just dead simple, in a good way.
FloorFix, The Topside Time-Saver
Need to clamp solid floor plates without drilling or welding? This is your go-to. FloorFix uses a cam mechanism that grips steel flanges up to 5/8″ thick. It’s ideal for retrofit jobs and quick installs.
- Best For: Solid steel plate, tight labor timelines, flat steel surfaces
- Why it’s loved: Installs from the top. No special tools. Nothing fancy.
FloorFix HT, Like FloorFix, But More Forgiving
FloorFix HT does everything the original does, but it tolerates misaligned steel and construction variances up to ±1/4″. It also clamps steel up to 1″ thick.
- Best For: Slightly out-of-spec installations, vibration-prone environments, new builds with steel tolerances
GrateFix, Built for Heavy Loads
Open bar grating? GrateFix clamps it from the top side with a steel body that doesn’t mess around. It’s available in multiple finishes, including stainless.
- Best For: Heavy-duty grating, outdoor or corrosive environments, when flange thickness varies
G-Clip GG, Quick and Reliable
The G-Clip GG is a classic galvanized fastener that clamps to horizontal steel members. Drop it in place, slide it toward the flange, and tighten.
- Best For: Fast installs, low-cost jobs, standard bar grating
G-Clip GM, For Device Mounting
This isn’t your average clip. The G-Clip GM is for mounting devices like sensors and pipes directly to grating. It uses a secure 3-part design.
- Best For: Mounting equipment to grating, walkways, press shops, utility runs
The Classic Grating Clip
Sometimes all you need is a standard clip that works. The Grating Clip is the default choice for basic bar grating installs.
View Grating Clip Product Page
- Best For: Everyday grating installs, maintenance-friendly floors, zero guesswork installs
Do Floor Grating Clips Really Matter That Much
Yes. They affect schedule, safety, and budget. Ordering the wrong clip causes delays. Using the wrong one can cause failures. The right clip makes a difference.
What to Ask Before You Order
- Are you fastening open bar grating or solid plate?
- What’s the steel flange thickness?
- Will this be exposed to weather or chemicals?
- Is vibration a concern?
- Do you have access underneath the steel?
Installation Tips from the Field
- Mark flange edges before install
- Use a torque wrench
- Use stainless in outdoor or corrosive areas
- If it takes over 2 minutes per clip, something is off
Still Not Sure, We’ll Help You Spec It
If you’re unsure which one fits your job, just ask. Our engineering team can walk you through specs and compatibility. No pressure, no pitch.
Frequently Asked Questions
Q: Do grating clips meet OSHA safety standards?
A: Yes. When installed correctly and selected properly, they support OSHA-compliant systems.
Q: Can I use grating clips on aluminum grating?
A: Yes, just make sure the materials are compatible. Contact our team to confirm.
Q: What clip is best for outdoor or corrosive environments?
A: Stainless steel versions of GrateFix or FloorFix HT are ideal.
Q: How tight should I torque the clip fasteners?
A: Follow manufacturer torque specs. Over-torquing can cause issues.
Q: Are grating clips reusable?
A: Some are. Inspect for thread damage or wear before reuse.
Last reviewed: June 12, 2025
